Flared Adventure and Gravel bar made of EC90 carbon composite - 10 degrees of flare (adds 68mm to bar width at tip of drops) - Ergonomic top section and size-specific shape to optimize strength, weight and ride feel - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 205g @ 42cm (width measured center-to-center)

Ideal for dialing in fit on bikes with tall front ends, the 2x Flat bar can be mounted with positive or negative 5mm rise to achieve the ideal riding position. Constructed of HMF UD carbon, the 2x Flat bar is perfect for race-worthy weight savings on any XC rig. - Carbon monocoque construction - Rise: +/- 5mm - Width: 710mm - Not bar end compatible - Matte UD finish - 183g

Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing. - Made from 6061 Aluminum - Single-groove cable routing - Accessory Mount Diameter (mm): 26.0 - Bar Clamp Diameter (mm): 26.0 - Bar Drop (mm): 128 - Bar Reach (mm): 80 - Bar Top Style: Round - Clip-on Compatible: No - Drop Bend Style: Compact - Material: Aluminum - Weight: 340g (40cm) - Width Measurement: Center

A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g

The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.

Tom Ritchey has been riding off-road and riding far – and designing products for such adventures - decades before anyone thought to call it “gravel riding” or “bikepacking.” His real-life experiences directly inform every product made by Ritchey – such as the beloved VentureMax handlebar. With its short reach, shallow drop and purposeful flare, the original VentureMax offers comfort and confidence to legions of riders looking to settle in and have some fun on those dirty drop bar adventures. Like its WCS- and Comp-level siblings, the new RL1 VentureMax is influenced by those life experiences and inspires riders to chase gravel and other mixed surface adventures. But the RL1 VentureMax also delivers Ritchey’s unwavering reliability and practical performance for budget-minded riders looking for components to upgrade their current ride or to complete their next build. With its round tops, short reach, and shallow drop the RL1 VentureMax offers multiple hand positions for comfort and confidence on any ride. Bolstering its comfort and performance in the rough stuff is its wide 24-degree flare at the drops. But it’s the Bio-bend in the drop that adds yet another design element that is practical and welcome for whatever surface you choose to ride upon and for however long your adventure endures. - RL1 VentureMax is reliability and practical performance for budget-minded riders - Round tops, short reach, and shallow drop offer multiple hand positions for comfort and confidence - 24-degree flare with Bio-bend at the drops - 6 deg backsweep

We took our lightest, most comfort-advanced bar – the EC90SLX – and used our second-tier carbon fiber for a more affordable package. The EC70 SL features the same top of the line MCD shape technology for easy position transferring; Taperwall to maintain stiffness while reducing weight; and Intelligent Flexibility for added vibration dampening comfort. It also features recesses for cables and comes in four lengths. The EC70 SL is the full race package deal. - Bar weight: 220g (42cm) - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC70 carbon

The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise

The Surly Corner Bar is for off-road riders who want to give drop bars a try without swapping out the drivetrain and brake levers on their current mountain setup. Does that make it an economical option for fresh excitement on the trail? Yes, it does. - Chromoly steel with custom-butted tubing - 22.2mm grip diameter - 25.4mm clamp diameter - One set of 25.4/31.8 x 60mm Problem Solvers shims included

Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm

TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center

- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum

With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 372g - Lever Compatability: Mountain 22.2mm

Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°

For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round

Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°

The E100 name is not used lightly and represents the culmination of nearly 20 years of creating the highest quality carbon components on the market. The new E100 road bar uses the same critically acclaimed Maximum Contact Drop (MCD) shape as our other premium road bars, with a stiff mid-section and long tails at the end of the drops for optimized ride characteristics and more hand positions. Most ultra-light bars sacrifice stiffness, durability and drop length to save weight, but not Easton's. The E100 bar meets the same rigorous fatigue and impact testing standards as our other road bars and does so as the lightest road bar Easton has ever created — a feathery 178g for a 42cm bar. - Finish: Matte UD Carbon/Ultra Gloss decals - Bar weight: 178g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm - Reach: 80mm - Drop: 125mm - Materials: E100 carbon

- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks