Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

ENVE Carbon Road Rear Hub
$600.00
A full-carbon road hub that improves drive response, saves weight, and increases wheel build stiffness via a refined hub flange geometry and lacing pattern. The hub's new geometry is paired with a high-engagement ratchet and premium stainless steel bearings, making this the highest performance road hub available. The Carbon Road Hub is for cyclists who want light weight, maximum efficiency, strength, and reliability. The new ENVE Carbon Road Hub builds upon the first generation carbon road hub's legacy by addressing the previous design's shortcomings and improving upon its strengths. First, we scrapped the drive system of the previous design in order to create the opportunity to design a more efficient hub shell with optimal flange geometries and engagement. After an extensive study of build geometry we settled on a hub shell geometry that delivers 16% more lateral stiffness when compared to the first generation carbon hub shell, and is on par with the leading hubs in the industry in terms of lateral stiffness. Additionally, the flanges of the hub have been completely redesigned to prevent premature spoke fatigue and feature a new spoke hole pattern that increases drive stiffness and reduces weight. The new drive system features a 40-tooth ratchet compared to the previous generations' 18 teeth. A ratchet-style drive system was chosen over a pawl system for its increased drive response, lighter weight, and ease-of-serviceability. To keep the Carbon Road Hub rolling smooth and fast, we opted for high-grade custom stainless steel bearings and races to prevent corrosion in any condition or environment. The outer bearings are fully sealed to eliminate debris from entering while the internal seals are non-contact to reduce rolling resistance. To reinforce the low maintenance objectives of these hubs, we developed what we call "Perfect Preload." Perfect Preload means that you'll never need to set or adjust the preload of your hubs, and bearing life is prolonged. - Hub drilling: 24 holes
DT Swiss 240 Classic EXP MTB Rear Hub
$476.90
Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
ENVE Carbon Road Front Hub
$400.00
A full-carbon road hub that improves drive response, saves weight, and increases wheel build stiffness via a refined hub flange geometry and lacing pattern. The hub's new geometry is paired with a high-engagement ratchet and premium stainless steel bearings, making this the highest performance road hub available. The Carbon Road Hub is for cyclists who want light weight, maximum efficiency, strength, and reliability. The new ENVE Carbon Road Hub builds upon the first generation carbon road hub's legacy by addressing the previous design's shortcomings and improving upon its strengths. First, we scrapped the drive system of the previous design in order to create the opportunity to design a more efficient hub shell with optimal flange geometries and engagement. After an extensive study of build geometry we settled on a hub shell geometry that delivers 16% more lateral stiffness when compared to the first generation carbon hub shell, and is on par with the leading hubs in the industry in terms of lateral stiffness. Additionally, the flanges of the hub have been completely redesigned to prevent premature spoke fatigue and feature a new spoke hole pattern that increases drive stiffness and reduces weight. To keep the Carbon Road Hub rolling smooth and fast, we opted for high-grade custom stainless steel bearings and races to prevent corrosion in any condition or environment. The outer bearings are fully sealed to eliminate debris from entering while the internal seals are non-contact to reduce rolling resistance. To reinforce the low maintenance objectives of these hubs, we developed what we call "Perfect Preload." Perfect Preload means that you'll never need to set or adjust the preload of your hubs, and bearing life is prolonged. - Hub drilling: 20 holes
SRAM X0 Thru Axle Rear Hub
$382.00 - $394.00
Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement—all while keeping everything light and steady. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. From pawl tooth to side cap, SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - DOUBLE TIME ratchet mechanism for durable, quick engagement - SPEEDBALL precision cartridge bearings for light, smooth action. No play adjustment needed for simplicity and convenience - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes - 150mm version includes 12x150mm & 12x157mm endcaps - Drilling: 32h - Rotor type: 6-bolt
SRAM X0 Rear Hub
$382.00
SRAM's X0 Hub offers lightweight, reliable performance. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions, and the tapered aluminum axle provides strength with minimal weight. This hub devours techy sections with it's super-smooth 6.9-degree engagement Double Time ratchet system. It accommodates standard 6-bolt rotors and comes with 12mm through-axle end caps and a 9mm quick release, so you can customize it to fit your ride.
ENVE Alloy Road Disc Rear Hub
$345.00
An ENVE worthy road, gravel, and cyclocross hub designed and engineered to raise the bar of hub performance compared to current industry-leading hubs by delivering more efficient wheel builds, improved power transmission, and reliability via a low-maintenance design. Who It's For Cyclists who would rather spend their time riding than maintaining their wheelset will find the ENVE Road Hub is the solution. ENVE hubs feature Perfect Preload which means no more hub slop, frustrating adjustments, or prematurely worn bearings. Stainless steel bearings and races keep corrosion at bay, while premium external seals prevent contamination. The ENVE Road Hub is for riders. Why We Made It ENVE's mission statement is to create a better ride experience through a combination of science and insight. The science is what our engineering team is expert at. The insight comes from the ride experiences of ENVE employees, athletes, ambassadors, and customers. Ultimately, the ENVE Road Hub is the embodiment of our mission and delivers a better ride experience. Here's how: first, billet is forged, then precision-machined into a lightweight hub shell that features optimized flange spacing and geometry for responsive and optimally stiff wheel builds that inspire confidence when accelerating and cornering. The freehub body is machined from 7075 alloy and hard anodized to reduce cog bite. Additionally, the freehub body can be removed without tools, and switching between Campy, Shimano, and SRAM can be accomplished without re-dishing the wheel. Housed behind the freehub body is a 40T ratchet-style drive system that delivers efficient and responsive power transmission in a highly reliable, virtually maintenance-free package. The bearings and races are stainless steel to withstand the elements and provide a smooth ride, miles beyond what the competition is spec'ing in their hubs and wheelsets. To further maximize rolling efficiency, non-contact bearing seals are used on all internal bearings where contamination is not a concern. Perfect Preload ensures the hubs will not develop lateral play or bearing slop over time. We make hubs so that the world's best rims or whatever your rims of choice may be can be built into wheelsets that require less maintenance, inspire more confidence, and help you achieve more speed with greater efficiency. It's the ENVE way. - Hub drilling: 24 holes
ENVE Alloy Road Rear Hub
$345.00
A forged aluminum blank is transformed by a CNC lathe into a lightweight hub shell. The newly developed hub flanges avoid premature fatigue of the spokes, while the special insert results in higher rigidity and simultaneous weight savings. To ensure a smooth, fast rolling action in the aluminum road hub, it has special, high-quality bearing shells and balls made of stainless steel, which guarantee optimal corrosion protection under any conditions or intended use. The outer bearings are completely sealed to keep out any dirt. In the hub interior, contactless seals are used to reduce rolling resistance. The maintenance effort is further minimized thanks to Perfect Preload technology, which also noticeably increases the service life of the bearings and eliminates the need to readjust preload. The 40-tooth freehub offers faster traction, lower weight, and additional ease-of-maintenance. - Hub drilling: 24 holes
SRAM Predictive Steering Hub
$250.00
SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.
ENVE Alloy Road Disc Front Hub
$230.00
An ENVE worthy road, gravel, and cyclocross hub designed and engineered to raise the bar of hub performance compared to current industry leading hubs by delivering more efficient wheel builds, improved power transmission, and reliability via a low-maintenance design. Who It's For Cyclists who would rather spend their time riding than maintaining their wheelset will find the ENVE Road Hub is the solution. ENVE hubs feature Perfect Preload which means no more hub slop, frustrating adjustments, or prematurely worn bearings. Stainless steel bearings and races keep corrosion at bay, while premium external seals prevent contamination. The ENVE Road Hub is for riders. Why We Made It ENVE's mission statement is to create a better ride experience through a combination of science and insight. The science is what our engineering team is expert at. The insight comes from the ride experiences of ENVE employees, athletes, ambassadors, and customers. Ultimately, the ENVE Road Hub is the embodiment of our mission and delivers a better ride experience. Here's how: first, billet is forged, then precision machined into a lightweight hub shell that features optimized flange spacing and geometry for responsive and optimally stiff wheel builds that inspire confidence when accelerating and cornering. The freehub body is machined from 7075 alloy and hard anodized to reduce cog bite. Additionally, the freehub body can be removed without tools, and switching between Campy, Shimano, and SRAM can be accomplished without re-dishing the wheel. Housed behind the freehub body is a 40T ratchet-style drive system that delivers efficient and responsive power transmission in a highly reliable, virtually maintenance-free package. The bearings and races are stainless steel to withstand the elements and provide a smooth ride, miles beyond what the competition is spec'ing in their hubs and wheelsets. To further maximize rolling efficiency, non-contact bearing seals are used on all internal bearings where contamination is not a concern. Perfect Preload ensures the hubs will not develop lateral play or bearing slop over time. We make hubs so that the world's best rims or whatever your rims of choice may be can be built into wheelsets that require less maintenance, inspire more confidence, and help you achieve more speed with greater efficiency. It's the ENVE way. - Hub drilling: 24 holes
ENVE Alloy Road Front Hub
$230.00
A forged aluminum blank is transformed by a CNC lathe into a lightweight hub shell. The newly developed hub flanges avoid premature fatigue of the spokes, while the special insert results in higher rigidity and simultaneous weight savings. To ensure a smooth, fast rolling action in the aluminum road hub, it has special, high-quality bearing shells and balls made of stainless steel, which guarantee optimal corrosion protection under any conditions or intended use. The outer bearings are completely sealed to keep out any dirt. In the hub interior, contactless seals are used to reduce rolling resistance. The maintenance effort is further minimized thanks to Perfect Preload technolog, which also noticeably increases the service life of the bearings and eliminates the need to readjust preload. - Hub drilling: 24 holes
DT Swiss 350 Road Rear Hub
$223.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
DT Swiss 240 Classic Road Front Hub
$220.90
The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
SRAM 900 Rear Hub
$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes
SRAM 900 Rear Hub
$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Includes Quick Release & 12x142mm Through AxleCaps - Fully convertible with tool free end caps - DOUBLE TIME mechanism offers smooth,quick and durable engagement - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Axle type: Conversion Caps included - Spoke holes: 24 - Brake compatibility: Disc (6-bolt) - Driver Mechanism: Double Time - Four Pawl - Axle material: Tapered aluminum - Driver body material: Aluminum - Hub shell: Aluminum - Seeker angled flanges - Oversized body
SRAM X0 Front Hub
$207.00
SRAM's X0 Hub stops at nothing for a lightweight hub that's worthy to wear the X0 name. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the tapered aluminum axle delivers strength with minimal weight. It's equipped with standard 6-bolt rotor mounts and is convertible from quick-release to 15mm to 20mm through-axles.
SRAM X0 Front Hub
$207.00
Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - SPEEDBALL precision cartridge bearings for light, smooth action - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes - Drilling: 32h - Rotor type: 6-bolt
Odyssey Clutch V2 Freecoaster Hub
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available
Shimano Alfine Dynamo 3.0W Center Lock Disc E-THRU Front Hub
$189.99
The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Proper positioning with 12mm E-THRU - Angular contact bearings - Compact & lightweight - Low rotational resistance - Effortless setting of disc rotor - Durable sealing performance
WeThePeople Supreme Cassette Rear Hub
$179.99
The features on this latest incarnation of WeThePeople's Supreme Cassette Hub include a peg friendly 12mm female bolt system, twin bearings in the non-drive side, and a new IGUS bushing Switch Drive Q-lite driver. The 12mm female bolt system gives you a stronger peg interface and a bombproof axle. Pair it up with WTP's Supreme hub guards (sold separately) and you have a super-dependable cassette hub ready for battle. - Material: 6061-T6 alloy refined hub-shell - Axle: 17mm 4130 crmo female axle, fully heat-treated - Bolts: super tough 12mm crmo bolt with 14mm extension - Bearings: 3 high quality sealed bearings in hub shell - Switch drive system, RSD/LSD switchable, new one piece pawl & spring system
Race Face Vault Front Hub
$174.99
- An oversized hub shell increases torsional and lateral stiffness - 6902 bearings for maximum durability - Wide bearing placement was designed to decrease load on the bearings - Low-drag labyrinth seals - Tool-free endcaps - Torque-cap compatible - Includes standard 15mm end-caps only, Torque must be purchased separately
Shimano Metrea Dynamo 3.0W Center Lock Disc Front Hub
$174.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance
WeThePeople Helix Freecoaster Hub
$149.99
Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way. - Unique internal arrangement with face-bearing clutch stopper - WTP Patented "Tri-Point" friction system - Hub Drilling: 32 - Cassette Body Type: Single Cog Driver - Axle Size: 14mm - Spoke Interface: J-Bend
Shimano Alfine Centerlock Dynamo Hub
$143.99 - $144.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
SRAM 746 Rear Disc Hub
$125.00 - $143.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
All-City Go-Devil Rear Disc
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm
Sturmey-Archer Dynamo 3.0 Drum Front Hub
$105.28 - $109.78
- Dynamo generator front hub features 3.0-watt headlight power supply - A356 aluminum hub shell with 9mm solid nutted axle (140mm overall axle length) - Choose 70mm or 90mm drum brake (brake levers sold separately) - Light sold separately
Hope Pro 2 Evo SRAM XD Driver
$108.38
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
DT Swiss 350s Straightpull Road Front Hub
$105.00
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
DT Swiss 350 Hybrid Front Hub
$104.90
Reliable, simple, and e-bike specific hub. To withstand the higher torque of e-drive systems, the 350 hybrid is equipped with steel rotors and a specific 24T ratchet machined out of hardened steel. Oversized bearings ensure smooth running under extreme conditions.
All-City Go-Devil Rear
$100.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. Rim brake hubs include quick release end caps and skewer. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Freehub bodies have 28 points of engagement. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 227g - Drive Side Center To Flange 16.25mm - Non Drive Center To Flange 36.25mm - Non Drive Flange Diameter 41mm - Drive Side Flange Diameter 49mm
Page 1 of 2 Next page